Klintensiv Decapons Acid Stripper & Descaler

Product details

Klintensiv Decapons is an acid descaling and stripping solution intended for professional cleaning of hard, non-porous, acid-resistant surfaces. A concentrated product, it effectively removes limescale, cement, rust and mineral deposits from grout joints, floors, water circuits and heating systems.

Technical Specifications

• Appearance: translucent, slightly opalescent liquid
• Solubility: soluble in water
• Composition: acidic agents, <5% nonionic surfactants, water
• Ready-to-use solution: 15–30% v/v (depending on the level of deposits)

Application Surfaces

• Floor tiles, wall tiles, ceramics
• Linoleum, Tarkett, epoxy resin
• Grout joints and floors resistant to acid solutions
• Water circuits: swimming pools, heat exchangers, condensers, boilers
• Water circuits in air conditioning and industrial systems (stainless steel/Al)

Applications

• Removing limescale from grout joints and floors
• Removing deposits from water circuits and heating systems
• Cleaning cement and plaster residues
• Descaling in the food industry (with appropriate rinsing)

Directions for Use

Limescale crusts (quick removal): 1:10 dilution (product:water), approximately 1 minute contact time, then rinse thoroughly with water.

Grout joints and floor stripping: 1:2 dilution or undiluted, approximately 40 seconds contact time, then rinse.

Water circuits (air conditioning/industrial process water): use undiluted.

Typical contact time on surfaces: 3–5 minutes, then rinse thoroughly with water. Scrubbing with a hard sponge or brush speeds up cleaning.

Descaling boilers and heat exchangers: 15–30% v/v solution. After treatment, drain the circuit and rinse with an alkaline neutralizing solution (100 g sodium bicarbonate per 10 L water), recirculate for a few minutes, then rinse with clean water. In food areas, rinsing with drinking water is mandatory.

Can be applied manually with a brush, sponge, microfiber cloth or by immersion in a plastic tank.

Available Sizes and Packaging

• Bottle: 1000 ml (12 pcs per case)
• Canister: 5 liters

Storage and Shelf Life

• Shelf life: 3 years from manufacture / 3 years after opening
• Storage conditions: original container, protected from prolonged exposure to light, at temperatures between 10–30°C
• Packaging with ≥30% recycled plastic; after use, rinse with cold water and recycle with plastics

Warnings and Precautions

• Acidic product: wear gloves and eye protection; avoid splashing.
• Do not use on easily corroded materials: copper, zinc, unprotected iron.
• Do not mix with other substances; do not combine with bleach or hypochlorite.
• Perform a compatibility test on a small area before large-scale use.
• Avoid prolonged contact with corrosion-sensitive metals.
• Consult and follow the safety data sheet (SDS/MSDS).
• Do not use the product if it has expired or under conditions other than those recommended.