Professional Disinfection Nebulizer

Technical Specifications

• Maximum power: 650 W
• Blower pressure: 180 mbar
• Operating speed: 17,000 rpm
• Noise level: 105 dB
• Nebulized solution output (internal scale): 3 ml/m³
• Biocide container volume: 1 L
• Weight (without container): 6.3 kg
• Dimensions (L×W×H): 205 × 315 × 252 mm
• Power supply: 230 V AC
• Efficiency: treats up to 300 m³ in a few minutes (duration depends on room volume, output and the biocide concentration required)

Areas of Use

• Homes and office spaces
• Medical and dental practices
• Hotels and classrooms
• Commercial spaces and markets
• Cars, buses, trains, aircraft
• Any enclosed volume requiring decontamination

Directions for Use

• Calculate the room volume (m³) and restrict access for the duration of the treatment
• Secure the biocide container in the holder and connect the silicone tube
• Place the unit on a horizontal surface with the nozzle pointing ~45° upward, at least 2 m away from objects
• Set the volume selector (m³) according to the required dose; use the formula: Volume set on CUBE S = Actual room volume × 3.33 (for biocides requiring 10 ml/m³)
• Switch ON and leave the room immediately; the unit switches off automatically at the end
• Wait at least 15 minutes before re-entering, then ventilate the space
• Follow the dose recommended by the biocide manufacturer and adjust the conversion factor if the biocide requires a different dose

Package Contents

• CUBE S (1 pc)
• Silicone tube (1)
• 1 L biocide container (1)
• Power cable (1)
• User manual (1)
• Leaflet (1)
• Transport protectors (2)
• Self-adhesive nozzle protector (1)
• "Nebulization" door warning sign (1)
• CUBE Atomizers sticker (1)

Biocide Compatibility

Use only biocides approved by the competent authority. The product is compatible with most formulations intended for nebulization. Check the biocide's Safety Data Sheet (SDS) before use. Example of a compatible biocide: DESOGEN AERO.

Warnings and Precautions

• DO NOT nebulize harmful, flammable or explosive substances (gasoline, solvents, alcohol, etc.)
• Evacuate people from the room during treatment; the operator may enter only wearing the PPE (goggles and full PVC suit) specified for the biocide
• Do not start the unit less than 2 m from objects; do not cover the vents or the nozzle
• Do not insert objects or fluids into the nozzle; do not move the unit while it is running
• Disconnect immediately in case of leaks and fix the cause
• Use only grounded outlets; do not use damaged cables or extension cords
• Do not open the housing – this voids the warranty
• Follow the Safety Data Sheet (SDS/MSDS) of the biocide used
• Display the nebulization warning sign at the room entrance and observe the waiting/ventilation times indicated by the biocide manufacturer

Maintenance

• Wipe the housing with a microfiber cloth; do not spray detergent directly on the unit
• When storing, protect the nozzle opening with the self-adhesive protector
• Keep the unit dry and clean

Troubleshooting

• Does not start: check the power supply, fuse and cable
• Starts but does not spray: check the position and filling of the container, the cap and the nozzle (it must not be covered)
• If the problem persists, do not work on the inside of the unit

Warranty and Compliance

Warranty: 12 months when used according to the manual. If an authorized technician finds a defect that cannot be repaired within 3 hours, the unit is replaced on the spot with a new one (according to the warranty certificate). The warranty is voided by unauthorized repairs, improper use or faulty power supply.

Standards: 2014/30/EU (EMC), 2014/35/EC (LVD), 2011/65/EC (RoHS).